Measuring for a Vertical Blind

Whether you'd like your new window treatments to sit inside or outside the window reveal, we’ve made the process simple with our step-by-step instructions.

Before you get started, you’ll need a tape measure (preferably metal), pen and paper. Please note that all measurements should be taken in millimetres (mm).

Recess Fit: Blind is fitted inside the window reveal.
Face Fit: Blind is fitted outside the window reveal.

Measuring for a Recess Fit

Measure the top width and drop in millimetres without making any deductions.

Minor deductions will be made to ensure the blinds clear the sides and bottom of the recess with ease (approx. 10mm from width, and up to 10mm from the drop).

Minimum Depth Required for Recess Fit

Please refer to the below measurements as an approximate guide to the minimum depth for the bracket.

Measuring for a Face Fit

We recommend the blind overlaps the window by 50-100mm on each side and above depending on the space you have. If you have architraves, we recommend measuring from architrave edge to architrave edge.

Then, measure the exact drop from the top of where you want your blind to be to the bottom. Please note, measuring 50-100mm above the window opening is recommended.

Handy Hints

• All of our blinds are made to measure, so be sure to triple check all measurements before placing an order.
• To ensure a perfect fit, take window handles or other obstructions into account.